About

Setting up my raspberry pi

In my computer:

SD card

1. Format for FAT32 (I used disk utility on mac. Format to MS_DOS). Use more than 8gb, mediawiki can become heavy.

2. Flash ISO to SD card (Raspbian Buster Light, https://www.raspberrypi.org/downloads/raspbian/ ) with a mounter (I've used etcher https://www.balena.io/etcher/ )

With raspi connected to power, internet, screen and keyboard:

01 Default login

Login: pi

Password: raspberry

02 SSH config

   $ cd /boot

   $ sudo touch ssh

   $ sudo reboot

03 Check IP address

   $ hostname -i

Response: 192.0.0.0

04 My keyboard wasn't working properly.

I had to change language of keyboard to US instead of UK.

   $ sudo raspi-config

   Localisation Options

   Change Keyboard Layout

   Choose US

After using the keyboard I changed back to UK to avoid errors.

05 Change hostname

   $ ssh pi@192.0.0.0

   $ sudo raspi-config

   Choose item no. 2 on the menu: Network Options

   Rename hostname to: newhostname

   $ reboot

06 Add user

   $ sudo adduser name

07 Add new user to sudo

   $ sudo adduser name sudo

08 You should be able to login with:

   $ ssh name@newhostname

09 I had an error with known hosts. I removed cached key on my computer:

   $ ssh-keygen -R 192.000.0.000

10 Remove default pi user

   $ sudo deluser pi

10 Use key-based authentication:

10.1 Add .ssh keys to RPI

https://www.raspberrypi.org/documentation/remote-access/ssh/passwordless.md#copy-your-public-key-to-your-raspberry-pi

10.2 Edit file

   $ sudo nano /etc/ssh/sshd_config

   Uncomment PassowrdAuthentication and set it to no;

   Uncomment PermitRootLogin prohibit-passowrd;

10.3 Reload SSH

   $ sudo /etc/init.d/ssh restart

10.4 Reboot RPi

   $ sudo reboot

10.5 In my computer:

   $ cd ~/.ssh

   $ sudo nano config

Add to the document:

   Host newhostname
       User name
       Hostname 192.000.0.0
       Port 22
       Identityfile /Users/ritagraca/.ssh/id_rsa
       Serveraliveinterval 30

10.6 To ssh to my pi now:

   $ ssh newhostname

11. Set static ip address for LAN

   $ sudo nano /etc/dhcpcd.conf

Edit this part:

   #Static IP text block
       interface eth0
       static ip_address=192.000.0.00
       static routers=192.000.0.0
       static domain_name_servers=8.8.8.8 8.8.4.4

Note:

I shut down my pi, IP changed and couldn't ssh to it. If this happened already, connect pi again to screen, find new IP with $ config command, and put new IP in ~/.ssh, step 10.5.

Installing Mediawiki on my pi

1. Install Apache

   $ sudo apt update

   $ sudo apt install apache2 -y

I will remove Apache and install Ngnix in the next steps, see Fixing my very slow MediaWiki.

2. Download Mediawiki

   $ mkdir Downloads

   $ cd Downloads

   $ wget https://releases.wikimedia.org/mediawiki/1.34/mediawiki-1.34.0.tar.gz (check the version)

   $ tar -xvzf mediawiki-1.34.0.tar.gz

3. Move

   $ sudo mkdir /var/lib/mediawiki

   $ sudo mv mediawiki-*/* /var/lib/mediawiki

4. Linking

   $ cd /var/www/html

   $ sudo ln -s /var/lib/mediawiki mediawiki

5. Updating

   $ sudo apt-get update

   $ sudo apt-get install apache2 mysql-server php php-mysql libapache2-mod-php php-xml php-mbstring

5.1 Error: Package 'mysql-server' has no installation candidate

Fix with:

   $ sudo apt install mariadb-server-10.3 php-mysql

5.2 Error: MySQL didn't ask for password so:

   $ sudo mysql_secure_installation

It will ask for password now.

6. Database

   $ sudo mysql -u root -p

Enter password. Type:

   mysql> CREATE DATABASE wiki;
   mysql> USE wiki;

   mysql> CREATE USER 'name'@'localhost' IDENTIFIED BY 'yourpassword';
   mysql> GRANT ALL PRIVILEGES ON wiki.* TO 'name'@'localhost'; 
   mysql> FLUSH PRIVILEGES;
   mysql> quit

7. Open browser

   http://ip_address_of_pi/mediawiki

On the website, it will ask for database connection settings:

   localhost
   database: wiki
   user: name
   password: yourpassword

Continue installation.

8. After setting up, it will ask to save LocalSettings.php. Download to your computer.

9. Move file from your computer to pi.

In your computer:

   $ scp LocalSettings.php name@hostname:/home/name/Downloads

10. Move from pi to the right place.

In your pi:

   $ sudo mv ~/Downloads/LocalSettings.php /var/lib/mediawiki/

some more help to setup mediawiki http://willbeone-techtips.co.za/2018/02/12/installing-mediawiki-raspberry-pi3/

Extension Semantic MediaWiki

1. Download composer

More here https://getcomposer.org/doc/00-intro.md#installation-nix

1.1 Download the installer to the current directory

   $ php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"

1.2 Verify the installer SHA-384

   $ php -r "if (hash_file('sha384', 'composer-setup.php') === 'e0012edf3e80b6978849f5eff0d4b4e4c79ff1609dd1e613307e16318854d24ae64f26d17af3ef0bf7cfb710ca74755a') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"

1.3 Run the installer

   $ php composer-setup.php

1.4 Remove the installer

   $ php -r "unlink('composer-setup.php');"

1.5 Global Access

Now that I have composer.phar, I will put it in /usr/local/bin to have global access.

   $ sudo mv composer.phar /usr/local/bin/composer

This means that instead of starting with $ php composer.phar, I just write $ composer.

Some more help to install composer https://www.semantic-mediawiki.org/wiki/Help:Installation/Using_Composer_with_MediaWiki_1.25%2B

2. Create and edit the file composer.local.json in /var/www/html/mediawiki.

   $ cd /var/www/html/mediawiki

   $ sudo nano composer.local.json

paste this code:

   {
           "require": {
                     "mediawiki/semantic-media-wiki": "~3.1"
           }
   }

3. Run the update script

   $ composer update --no-dev

3.1 Change permissions:

Gives error:

   file_put_contents(./composer.lock): failed to open stream: Permission denied

Give permissions:

   $ chmod -R 777 ./

4. Maintenance script

   $ php maintenance/update.php

5. Enable Semantic MediaWiki on LocalSetting.php

Write in the end of the file:

   enableSemantics( ' http://192.000.0.0/mediawiki/ ' );

6. Repeat step 4.

I had a error with database. I had to run the update script again. If when running this script there's error with permissions, just change permissions, step 3.1

7. Uploading files to the server

Check first folder permissions, and change if necessary:

   $ chmod -R 777 ./

To allow bigger files:

7.1. Edit this file

       $ sudo nano /etc/nginx/nginx.conf

7.2 Add this in the bottom of the http part:

       # set client body size to 2M
       # client_max_body_size 2M;

7.3 Reload the server

       $ service nginx
        reload